GE DJSR473ET Dryer Manual

The GE DJSR473ET is a high-efficiency dryer designed to provide optimal drying performance for your laundry. It features multiple drying cycles, a large capacity drum, and advanced moisture sensing technology to prevent over-drying. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple drying cycles, moisture sensor, lint filter, and energy-saving options.

Feature	Description
Moisture Sensor	Automatically adjusts drying time based on moisture levels.
Multiple Drying Cycles	Includes options for delicate, heavy-duty, and timed drying.
Lint Filter	Easy to clean filter to maintain efficiency.
Energy Saver	Reduces energy consumption during operation.
End-of-Cycle Signal	Alerts when drying cycle is complete.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Choose a location with adequate ventilation.
Connect the dryer to a suitable power source.
Level the dryer using adjustable legs.
Connect the venting system to the back of the dryer.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer and follow the initial setup instructions.

Select the desired drying cycle using the control panel.
Load the dryer drum with laundry, ensuring not to overload.
Press the start button to begin the drying process.

CAUTION! Do not leave the dryer unattended during operation.

Specifications

Model: GE DJSR473ET.
Capacity: 7.0 cu. ft.
Power Supply: 240V, 30A.
Dimensions: 27" W x 30" D x 43" H.
Weight: 120 lbs.
Drying Cycles: 12 preset options.
Warranty: 1-year limited warranty.

Controls and Settings

Access the control panel to select drying cycles, adjust settings, and monitor progress.

Control Features: Start/Stop button, cycle selector, temperature settings, and time adjustment.

Connecting Power

Ensure the dryer is connected to a dedicated electrical outlet.

Use a 3-prong or 4-prong power cord as required.
Ensure the circuit breaker is rated for the dryer.
Check for proper grounding.

Tip: Consult a qualified electrician if unsure about electrical connections.

Operating the Dryer

Follow these steps to operate the dryer effectively:

Load laundry into the drum without overloading.
Select the appropriate drying cycle.
Press the start button to begin drying.
Monitor the drying process through the control panel.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Inspect and clean the venting system periodically.
Check for any blockages in the exhaust duct.

CAUTION! Unplug the dryer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power supply issue	Check power cord and outlet.
No heat	Heating element failure	Inspect and replace heating element.
Clothes not drying	Blocked vent	Clean lint filter and venting system.
Excessive noise	Loose parts	Inspect for loose screws or foreign objects.

Service: For further assistance, contact GE customer service.